HS3000-3218-2GF Gigabit Managed Ethernet Industrial Switch 2 optical 16 electrical Ports

Support 2 gigabit optical ports and 16 gigabit electrical ports

Support IEEE802.3/802.3u/802.3ab/802.3z/802.3x store and forward mode

Support large backplane bandwidth, large switch cache, and wire speed forwarding on all ports

Support the ERPS ring network protocol of ITU G.8032 standard, and the self-healing time is less than 20ms

STP/RSTP protocol supporting IEEE 802.1D/W standard

Redundant dual power DC 24V/48V input, anti reverse connection, over-current protection function

-40 ℃~+75 ℃ wide temperature design, the equipment can adapt to various harsh on-site environments

IP40 grade protection, high-strength metal shell, fanless, low power consumption design

Interface information

Gigabit electrical port: 16 10/100/1000Base-T (X) RJ45 interfaces

Gigabit optical port: 2 gigabit SFP optical modules can be inserted

Serial interface: provide one RJ45 debugging serial port

Alarm port: provide 1 relay alarm output

Power interface: 5-core 5.08mm spacing terminal block

Mechanical structure

External dimension: 150 mm (H) x 130 mm (D) x 62 mm (W)

Installation mode: DIN rail installation

Weight:<1.3kg

Protection grade: IP40

Environmental requirements

Operating temperature: - 40 ° C~+75

Storage temperature: - 40 ° C~+85 ° C

Relative humidity: 5%~95% (non condensing)

MTBF: 500000 hours

Switch Properties

MAC address table: 8K

Forwarding method: store and forward

Cache size: 4.1M

Forwarding frame length: up to 10000Bytes

Transmission distance

Twisted pair: 100m (standard CAT5/CAT5e cable)

Multimode optical fiber: 850nm, 2Km; 1310nm, 5Km single-mode optical fiber: 1310nm, 20Km; 1310nm，40Km； 1310nm，60Km； 1550nm，80Km

Power requirements

Working voltage: DC 24/48V

Power consumption of the whole machine:<15W

Software features

Redundant network: support STP/RSTP and ERPS redundant ring network

Multicast support: support IGMP Snooping V1/V2/V3, support GMRP

VLAN: support IEEE 802.1Q 4K VLAN

Link aggregation: supports manual aggregation and static/dynamic LACP protocols

QOS: supports COS, DSCP, 8 queues, WRR, SP, WFQ scheduling modes, and policy QOS

Diagnosis and maintenance: support port image, syslog, ping command, etc

Management function: support CLI, WEB, SNMP management mode and Houshi NIS management system

Alarm management: support one relay alarm, support RMON management, and TRAP alarm

Security functions: support DHCP Snooping, Option 82, 802.1X, hierarchical user management, ACL access control list, DDOS, port based MAC filtering/binding

Data control: support port speed limit based on ingress/egress, support half duplex pressed flow control and 802.3X full duplex flow control, and support storm suppression based on broadcast, multicast, and unknown unicast

indicator lights:

Power indicator: P1, P2

System operation indicator: SYS

Alarm status indicator: ALM

Port status indicator: electrical port L/A/SPD (1~16), optical port: 17~18